xArrow Software

Allen-Bradley CompactLogix 1769

1. Test Environment: a. Router is TP-Link(TL-WR842N), provide WIFI connection, its IP address is 192.168.1.1
b. The Android phone used to test is Huawei Honor 9 (Android 8.0), the phone connect to route via WIFI, its IP address is 192.168.1.100 (assigned by the router). The phone have already installed the xArrow SCADA APP (the apk file can be found at [xArrowAndroid Install Folder\Out\ANDROID_BIN\xArrowAndroid.apk]).
c. PLC’s IP is 192.168.1.36, connect to the LAN port of the router.

1.1 Hardware
PLC: CompactLogix 1769-L33ER
Program Software: RSLogix 5000 V20

1.2 Software
xArrow SCADA 2.0
2. PLC Settings: Connect the computer and the PLC with the USB programming cable, and start RSLinx to set the PLC’s IP address:

Here as example, set the tag in RSLogix:
3. xArrowAndroid Configuration: 3.1 Create Station

3.2 Configure Analog
Configure [Data Configuration\Analog…] to set analog tags, as follows:

3.3 Configure Switch
Configure [Data Configuration\Switch…] to set switch tags, as follows:

3.4 Make Drawings

3.5 Run Emulator

3.6 Download Project
Note: the xArrow SCADA should already started in the android phone.
4. Running